Vape devices safety basics in Liverpool (Smok Morph)
Vape devices advice for Liverpool, covering long-term test, what to look for and where the trade-offs actually sit.
Local availability in Liverpool shapes the practical answer more than the marketing does. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Local availability in Liverpool shapes the practical answer more than the marketing does. For pod fans, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 80 and recharges over Type-C fast charge. We would pair the RELX Pro with a 50:50 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. In Liverpool, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself. Charging over Type-C fast charge takes about 51 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
For pod fans, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. Expect roughly 1464 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | RELX Pro |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 1500 mAh |
| Power range | 80 W |
| Liquid capacity | 3.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | stainless steel |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | mesh window |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Blueberry Muffin: creamy, sweet, described as baked blueberry with a soft crumb. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Availability shifts often, so check the current listing before committing to a large order.
